Guangzhou Karts Mechanical & Electrical Manufacture Co.,Ltd.
Guangzhou Karts Mechanical & Electrical Manufacture Co.,Ltd.
Contact Us
What External Equipment Inspections Should Be Done for the Face Mask Machine?
What External Equipment Inspections Should Be Done for the Face Mask Machine?


Many customers who have purchased a face mask machine do not know what inspections should be done after debugging the face mask machine, and what is the face mask machine peripheral equipment? The transmission system of the face mask machine includes motors, gears, reducers, sprockets, chains, conveyor belts and other components. So what external equipment inspections should be done for the face mask machine?


1. Ultrasonic system of the face mask machine:


It is composed of an ultrasonic electric box, a vibrator, a welding head, and a connecting wire.

Check whether the ultrasonic system is clean, especially the ultrasonic electric box, vibrator (transducer), and welding head (amplification ratio) must be independently cleaned and water should be removed, and the connection wiring must be firm. Often check the degree of wear of the ultrasonic welding head. Pay attention to the investigation of the change plan of the voltmeter and ammeter pointers on the ultrasonic electric box.


2. Gas supply system of the face mask machine:


It is composed of air source filter system, air pipe and cylinder.


Check if there is water in the air filter cup? Drain the water, and by the way, drain the air compressor (air compressor drain: In areas with high humidity, drain the air compressor every day). Check for air leaks in the trachea? Is there a leak in the cylinder? Is the orientation and operation of the cylinder magnetic sensor normal?


3. Electrical system of the face mask machine:


Check whether the circuit connector of the face mask machine is loose, and whether the main power cable, branch signal cable, etc. are worn out or ageing. Is the electrical device loose? Is the inside of the electrical box cleaned independently? Is the exhaust fan operating normally?


The above is the inspection of some external equipment for the face mask machine. We need to check whether there are dust and other things on the outer surface of the face mask machine that affect heat dissipation, whether the gears and sprockets are oiled, whether there are attachments, and so on. The face mask machine must be inspected before the equipment can be used normally for production.


As a manufacturer of folding face mask machines, Guangzhou Karts Mechanical & Electrical Manufacture Co.,Ltd has the technologies of the design and manufacture of automatic (semi-automatic) engineering systems, high-precision molds, jigs, and ultrasonic suture that are the first in China.